*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog. **Click Load Table icon for size & fastening requirements. Mudsill anchor provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique design provides installation flexibility, eliminating problems with misplaced anchor bolts. Suitable for stem wall or slab foundations, mudsill anchors are one piece so there are no more nuts and washers to lose. LMAZ - an economical replacement for 1/2" sill plate anchor bolts MA - for slab or stem wall construction MAB - anchors mudsill to concrete block, poured walls or slab foundations Material: LMAZ, MAB - 18 gauge; MA - 16 gauge Finish: MA, MAB - Galvanized (some available in ZMAX® coating) LMAZ - ZMAX® only. See Corrosion Information. Installation: Use all specified fasteners. See General Notes. CMU shall have a minimum f'm = 1500 psi and concrete shall have a minimum f'c = 2000 psi. Not for use where a horizontal cold joint exists between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load. Not for use in slabs poured over foundation walls formed of concrete block or with brick and 4" masonry block stemwalls.

Used for portable indoor/outdoor installation, one set of steel anchor weights will hold down one goal. Carrying bag contains 40 lbs. of steel weights. Chain included for convenience.

Price is for SET.

These corner flags offer the ulimate in portablility. These easy to carry, foldup, go-anywhere flags offer a unique 4 section 1" PVC material. Fully connected pole is 72" high. Each section fits into the next for quick strong assembly. The bottom section comes with a glued on spring and spike. All 4 sections are connected by an interior 3mm cord so that no pieces are lost when disconnected. Bright orange 19" x 12" flag on each pole. Sold in sets of 4.




Return Policy: This item is guaranteed to be free of defects in workmanship or materials for one year from the original date of delivery when installed and maintained properly. The manufacturer agrees to repair or replace without charge, at their choice, a product judged defective for either of these reasons and to return the item (or its replacement) freight prepaid. This guarantee policy is honored only when the product is inspected and found to have experienced normal use. The product warranty as well as inspection result are to be provided by the manufacturer rather than the retailer.

Price is for set.

This set orients corners for perimeter lining and flag installation.

Set includes:

4 Ground Sockets with Plugs
4 Corner Flags with Springs
Installation Accessory Kit(IAK)
Storage Bag





Return Policy: This item is guaranteed to be free of defects in workmanship or materials for one year from the original date of delivery when installed and maintained properly. The manufacturer agrees to repair or replace without charge, at their choice, a product judged defective for either of these reasons and to return the item (or its replacement) freight prepaid. This guarantee policy is honored only when the product is inspected and found to have experienced normal use. The product warranty as well as inspection result are to be provided by the manufacturer rather than the retailer.

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog. **Click Load Table icon for size & fastening requirements. Mudsill anchor provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique design provides installation flexibility, eliminating problems with misplaced anchor bolts. Suitable for stem wall or slab foundations, mudsill anchors are one piece so there are no more nuts and washers to lose. LMAZ - an economical replacement for 1/2" sill plate anchor bolts MA - for slab or stem wall construction MAB - anchors mudsill to concrete block, poured walls or slab foundations Material: LMAZ, MAB - 18 gauge; MA - 16 gauge Finish: MA, MAB - Galvanized (some available in ZMAX® coating) LMAZ - ZMAX® only. See Corrosion Information. Installation: Use all specified fasteners. See General Notes. CMU shall have a minimum f'm = 1500 psi and concrete shall have a minimum f'c = 2000 psi. Not for use where a horizontal cold joint exists between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load. Not for use in slabs poured over foundation walls formed of concrete block or with brick and 4" masonry block stemwalls.

Price is for PR.

7'H x 21'W x 5'D x 10'B - 3 mm twisted, knotted polyethylene rope




Return Policy: This item is guaranteed to be free of defects in workmanship or materials for one year from the original date of delivery when installed and maintained properly. The manufacturer agrees to repair or replace without charge, at their choice, a product judged defective for either of these reasons and to return the item (or its replacement) freight prepaid. This guarantee policy is honored only when the product is inspected and found to have experienced normal use. The product warranty as well as inspection result are to be provided by the manufacturer rather than the retailer.

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog. **Click Load Table icon for size & fastening requirements. Mudsill anchor provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique design provides installation flexibility, eliminating problems with misplaced anchor bolts. Suitable for stem wall or slab foundations, mudsill anchors are one piece so there are no more nuts and washers to lose. LMAZ - an economical replacement for 1/2" sill plate anchor bolts MA - for slab or stem wall construction MAB - anchors mudsill to concrete block, poured walls or slab foundations Material: LMAZ, MAB - 18 gauge; MA - 16 gauge Finish: MA, MAB - Galvanized (some available in ZMAX® coating) LMAZ - ZMAX® only. See Corrosion Information. Installation: Use all specified fasteners. See General Notes. CMU shall have a minimum f'm = 1500 psi and concrete shall have a minimum f'c = 2000 psi. Not for use where a horizontal cold joint exists between the slab and foundation wall or footing beneath, unless provisions are made to transfer the load. Not for use in slabs poured over foundation walls formed of concrete block or with brick and 4" masonry block stemwalls.